Raspberry Pi LTE Module HAT expansion board (17372)

SIM7600G-H 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi

is a 4G/3G/2G GNSS communication and positioning module that supports LTE CAT4 up to 150 Mbps for data transmission over the incoming communication line. The module has a fairly low power consumption.

You can connect this 4G module to your computer to surf the internet or connect it to a Raspberry Pi to enable functions such as 4G high-speed connection, wireless communication, phone call, SMS sending, global positioning, etc.

Features

• Standard Raspberry Pi 40PIN GPIO connector, supports Raspberry Pi, Jetson Nano series boards
• Supports modem, phone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, LBS base station positioning
• Built-in USB interface for testing AT commands, receiving GPS positioning data, etc.
• Built-in USB2 / UART converter CP2102 for serial debugging
• UART control connector for connecting to host boards such as Arduino/STM32
• SIM card slot, supports 1.8V/3V SIM card
• TF card slot for storing data such as files, messages, etc.
• Built-in audio jack and audio decoder to make a phone call
• 2 LED indicators, easy to monitor the working status
• Built-in voltage converter, the working voltage can be customized to 3.3V or 5V by jumper
• Transmission speed: 300 bps 4Mbps (default: 115200 bps)
• Data rate: 9600 bits / s 115200 bits / s
• Management with AT commands (3GPP TS 27.007, 27.005 and V.25TER)
• Supports SIM application tools: SAT Class 3, GSM 11.14 Release 99, USAT
• Comes with development resources and guidance (examples for Raspberry Pi / Jetson Nano / Arduino / STM32)

Communication characteristics:

GNSS characteristics:

Receiver type:
16-channel
C/A code.
Sensitivity:
Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
Cold start: -148 dBm
Time-To-First-Fix :
Cold Start: